digital electric finger scanner code system biometric recognition fingerprint access control

This order:

1*finger reader

1*control box

1*remoter(for program)

Parameter

Power supply：DC10V--30V

Standby current：6mA（DC12V）

Output：Relay（Max. current: 10A）

Fingerprint capacity：300 pieces

Instructions for control board：

1.1 Press SET button shortly,system in register state and indicator light flash fast, press two times for each fingerprint, fingerprint register successful when hearing music.

Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting 8 seconds.(Fingerprint capacity is 100 pieces when press SET button，the registered fingerprints are stored in database 01)

1.2 When back to factory default, press SET button until hear “Di” long beep and

music,means initialization operation successful

2.1 Red indictor lighted means in programming stated, music means operation successful, default password: 123456，password length: 6numbers

2.2 Change password: Press password1new passwordnew password#

2.3 Register fingerprint：Presspassword2*DD# , DD from 00 to 02(00, 01 and 02 refer tothree different fingerprint databases), each database can store fingerprint 100 pieces； Exit fingerprint in register state when press * button or waiting for 10s.

2.4. Empty fingerprint：Press password3*password#

2.5. Control Work Mode:

Press password4*00# Fingerprint module touch standby function ON

Press password4*01# Fingerprint module touch standby function OFF(Normally on Mode)

2.6. Delay time for closing relay：Press password5*SS #; SS from 00 to 20, SS means the closing time for relay(from 0.5s to 20s), e.g.: 00 means 0.5s, 20 means 20s; Default time is 5s.

2.7. Delete fingerprint：Press password6*DD#, DD from 00 to 02 (00, 01 and 02 refer tothree different fingerprint databases).

2.8. PasswordUsing：Press *password and relay closed, press # and relay opened.

Note: