
Aqara · E1
Aqara E1
Mi Home compatible
No current offers for this region
Try the other price region or explore similar devices below.
Explore similar devices ↓Purchases are completed at the store. We may earn a commission from qualifying links.
- Gateway
- Compatible Zigbee hub required
Aqara Water Leak Sensor E1 (SJCGQ13LM) is a compact Zigbee leak detector powered by a CR2032 coin cell. Paired with a compatible Zigbee hub, it raises an alert when water reaches its contacts.
Product information
Early warning of leaks
The Aqara Water Leak Sensor E1 (model SJCGQ13LM) is a small detector that sits on the floor next to a washing machine, dishwasher, water heater, sink or pipe joint. When water bridges the contacts on its underside, it reports a leak so you can act before the water spreads. At about 50 × 50 × 15 mm it fits under cabinets and behind appliances.
Hub, power and placement
The sensor communicates over Zigbee and needs a compatible Zigbee hub, which delivers the alerts and lets a leak trigger automations. It runs on a single CR2032 coin cell, so no wiring is needed. Lay it flat where water would collect first, test it with a little water after pairing, and replace the coin cell when it runs down.
Key characteristics
- Mi Home app
- Compatible
- Battery
- CR2032
- Brand
- Aqara
- Dimensions
- 50 × 50 × 15 mm
- Gateway requirement
- Compatible Zigbee hub required
- Model
- SJCGQ13LM
- Product type
- Water leak sensor
- Series
- E1
- Wireless protocol
- Zigbee




