Aqara Smart Smoke Detector
Notice
1)The product must be used with compatible Aqara Hub. (Aqara M1SAqara M1S (2022 Version), Aqara E1, Air Conditioning Companion P3)
2)Support APP: Aqara Home, Apple Home, Mijia(This is the Chinese version, please change the region of the APP to "China Mainland" first before connecting.)
Specification
Model: JY-GZ-01AQ
Battery: DC 3V(CR17450)
Wireless Protocol: Zigbee 3.0
Battery capacity: 2400mAh
Alarm sound pressure: >80dB (3m away from the alarm)
Product net weight: 159g (including battery)
Dimensions: ⌀104.6 × 42 mm
Operating Temperature: -10°C ~ 55°C
Operating Humidity: 0 ~ 95% RH, no condensation
What is in the Box
Detector × 1, Mounting Plate × 1, Battery × 1, Adhesive Sticker × 1
Smart Smoke Detector
Detection and protection at the first sign of smoke.
Wide Compatibilities
Compatible with most popular smart home ecosystems. HomeKit, Yandex Alice*, IFTTT, and more are supported. Just connect it to the Aqara Hub and bind the account.
*Some ecosystems may be unavailable at the time of launch.
Notifying in No Time
Built-in Siren of up to 90 dB*
The built-in powerful siren that will allow you to hear it even if you are in another room, sleeping or listening to loud music. Also, the device has a colorful LED that will blink in case of an alarm.
- The decibel measurements may vary significantly depending on the distance and the environment.
Remote Push Notifications
The Smoke Detector will push notifications (including Critical Alerts) to your phone or any other device where the Aqara Home app is installed, no matter you are at home or away.
Synchronized alerts of hubs and group
Moreover, the Smoke Detector is able to trigger all of your siren-equipped Aqara Hubs automatically via the Alert System, and other Aqara Smoke Detectors to sound an alarm simultaneously.
10-Year Battery Life
The Smoke Detector can reach a record ten-year battery life* . You will not need to worry about changing the battery for a long time and the low battery alarm is supported for an added peace of mind.
*10-Year battery life is achieved with alarming once a month and lasting for 5 minutes.
Premium Design
One button control
Insect proof net
Flame retardant material
Disarm the Siren Easily
In case the detector was triggered, you will be able to check if there is any danger and disarm it easily. Unlike the traditional alarms, you can use both the Aqara Home app or other Aqara devices to do it.
Configure smart home automations with Aqara devices
IF the fire is detected
THEN The G3 Cam will turn to the Smoke Detector while the Temperature Sensor will monitor the temperature.
Smoke Detector + Camera Hub G3 + Temperature and Humidity Sensor
Q&A
What do the flashing lights and beeps of an Aqara smoke alarm mean?
- Low battery: yellow light flashes once every 48 seconds, and beeps once every 48 seconds; 2. Fault: yellow light flashes three times every 48 seconds, and three beeps every 48 seconds; 3. Fire alarm: every 1 second Red light flashes once, beeps once every 1 second, pauses once every three beeps; 4. Linkage alarm: flashes red light once every 4 seconds, and beeps once every 1 second, pauses once every three beeps; 5. Normal monitoring: none Indicator light, no beeping.
Can the Aqara smoke alarm be used alone?
The Aqara smoke alarm can be used alone. When not connected to the gateway, it can only perform local sound and light alarms. When connected to the Zigbee gateway, it can realize functions such as remote alarm and intelligent linkage.
How does the Aqara smoke alarm work?
Aqara smoke alarm uses the principle of light scattering by smoke particles. When the smoke concentration is higher, the scattering is more obvious and the photocurrent generated is stronger, thus triggering the fire alarm.
What conditions can cause an Aqara smoke alarm to falsely report a fire?
- False alarms caused by cooking fumes or steam; 2. False alarms caused by condensation on the equipment due to humid weather; 3. False alarms caused by the use of incense, electric mosquito coils, etc.; 4. False alarms caused by spraying air fresheners, insecticides, etc. false positive. 5. The accumulation of a large amount of dust inside the equipment causes false alarms.
How do I silence my Aqara smoke alarm after a false alarm?
Press the mute/self-check button on the surface of the device; or open the mobile APP, and click the "Silence" button on the home page of the device to stop the alarm sound.
What are the precautions for the installation of Aqara smoke alarms?
- Only for indoor installation and use; 2. It should not be installed in kitchens and other places that are prone to non-fire smoke and steam; 3. It should not be installed in bathrooms or places where it is easy to get wet; 4. It should be kept with ventilation fans, air conditioners and vents A distance of more than 1.5 meters; 5. A horizontal distance of more than 0.5 meters should be maintained with the edge of walls and beams; 6. There should be no obstructions within 0.5 meters of the horizontal distance around the equipment; 7. It should be installed horizontally. The inclination angle should not be greater than 45°; 8. It should not be installed in a place where the temperature is below -10°C or above 55°C; 9. It is recommended to use screws for installation; 10. When installing by sticking, the installation surface must be cleaned in advance to ensure The surface contacted by the double-sided tape is smooth, flat, dry and clean; 11. When installing by sticking, do not stick the device on the surface of paint or other coatings, otherwise it will easily peel off after a period of time and cause the device to fall off.
Aaqra hub M1S Gateway Zigbee 3.0 WiFi Remote Control RGB Radio Aqara Relay Wireless humidity Door Sensor Support Mi Home Homekit_Smart Remote Control
Aqara
Aaqra hub M1S Gateway is a Zigbee 3.0 WiFi enabled smart home controller that allows you to remotely control your RGB lights, radio, and Aqara relay devices wirelessly. It also supports humidity and door sensors and can be integrated with Mi Home and Homekit for smart home control.ZHWG15LM
Product specifications
Mi Home app compatible:YES
Alarm setting value:10%LEL
Alarm sound pressure:>80dB (3m away from the alarm)
Aqara smart smoke detector:Aqara Fire Alarm
Aqara smoke alarm:Aqara Smoke Detector
Aqara smoke sensor:Aqara Zigbee
Battery:DC 3V(CR17450)
Battery capacity:2400mAh
Brand name:Aqara
Camera equipped:No
Certification:CE
Communication method:Zigbee
Compatibility:All Compatible
Control channels:2 Channels
Detection gas:Methane (CH4)
Detection range:0~20%LEL
Feature 2:Aqara smoke Alarm
Feature 3:Aqara smoke Sensor
Feature 4:aqara smoke detector homekit
Feature 5:aqara smoke zigbee
Features:Slot
Item:Aqara Smoke Detector Zigbee 3.0
Max speed:none
Model number:JY-GZ-01AQ
Operating humidity:≤93%RH (non-condensing)
Operating temperature:-10℃~ 55℃
Origin:Mainland China
Plug type:US plug
Power supply:220VAC
Scale:1:5
Service life:5 years
State of assembly:Ready-to-Go
Wireless protocol:Zigbee 3.0
Zigbee 3.0:Mi home APP
Related items
Where to buy
29.73- 55.08from 10 sellers