isolation type water according to the detection electrode impedance change after immersion in the transmitter, through special integrated chip of water input signals are compared, and signal amplification, plastic, dry contact output or high and low level change signal, indicating transmitter location whether there is water;Structure integration fully sealed plastic shell design, to ensure the high reliability of the product.Suitable for: communication base stations, hotels, restaurants, precision room, library, warehouse receiving alarm center or monitoring equipment room and other places where the water need to report to the police.Characteristics: the integration of the whole seal design;All power supply, input and output isolation;High reliability;Strong anti-interference.Can choose the way to high and low level or relay a variety of output alarm signal.

Product features High sensitivity, fast response time, and correct. Adopt photoelectric isolation and transformer isolation, safe and reliable;Integration of the whole seal design, safe and easy to use

The main electrode with isolation layer, in alarm when the water reached a certain height, and optional auxiliary electrodes, increase the detection range.

Technical parameters:

Working power supply: DC12V/24V

Working temperature 0 ℃ to 50 ℃

The output form Relay (load current 30 ma) relay output NC \ NO choice

Static power < 0.3 W alarm maximum power consumption 0.5 W

Working humidity 20% RH to 20% RH rate of false positives < 100 PPM

High and low level output: VL to 0 V (+ 0.5 V)

The load ability of the VH is 5 V or 12 V (+ / - 0.5 V)

Size:48.63730.6mm

Wire:1.5M

Solid state relay acuities were 500 ma (high current can reach 1 a, need to order)

Note:

High and low level 3 or higher k high level output 12 v, the power supply voltage should be higher than 16 v

Detection cable: sensing cables point detection point, about 10 cm uniform

Configuration: 35 lm detection standard cable, can be customized to detect cable length

Application characteristics and technology parameters and instructions:

Saying a dip detector is widely used in computer room indoor environment such as the ground of condensate water detection and other special occasions.The sensor adopts full isolation, sensor input power, feel the should line, completely isolated relay output of three parts.Safe and reliable, beautiful appearance, convenient installation.

Red: 12V+

Black:GND

Yellow:NC

Brown(green):COM

Blue:NO