Preflashed TASMOTA WiFi Plug Works With Home Assitant Electric Consumption Monitoring 16A
Preflashed TASMOTA WiFi Plug Works With Home Assitant Electric Consumption Monitoring 16A

Pre Flashed TASMOTA EU Plug Consumption monitoring
Notice:
The plugs shipped after 7th May 2022 is upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
The latest full version
Fully compatible with standard Tasmota OTA server
Pre configed IOs plug and play
Pre flashed before assembling
Build in ESP8285 chip with 2M flash
Electric calibration needed for correct monitoring.
Total local control with quick setup and updates.
Control using MQTT, Web UI, HTTP or serial.
Automate using timers, rules or scripts.
Integration with home automation solutions.
Incredibly expandable and flexible.
Tasmota Template
("NAME":"Athom Plug V2","GPIO":[0,0,0,3104,0,32,0,0,224,576,0,0,0,0],"FLAG":0,"BASE":18)
The old version ( Shipped before 7th May 2022):
("NAME":"Athom Power Monitoring Plug","GPIO":[0,0,0,32,2720,2656,0,0,2624,544,224,0,0,1],"FLAG":0,"BASE":18)
GPIO
GPIO# Component
GPIO0 None
GPIO1 None
GPIO2 None
GPIO3 CSE7766 Rx
GPIO4 None
GPIO5 Button1
GPIO9 None
GPIO10 None
GPIO12 Relay1
GPIO13 LedLinki
GPIO14 None
GPIO15 None
GPIO16 None
FLAG None
The old version ( Shipped before 7th May 2022):
GPIO# Component
GPIO0 None
GPIO1 None
GPIO2 None
GPIO3 Button1
GPIO4 BL0937 CF
GPIO5 HLWBL CF1
GPIO9 None
GPIO10 None
GPIO12 HLWBL SELi
GPIO13 LedLink
GPIO14 Relay1
GPIO15 None
GPIO16 None
FLAG None
Specification
Specification:
*Input voltage:100-240VAC 50/60Hz
*Current:16A(Max)
*Power rating:2200W
Product Size:L51W51*H85mm
*Standard:EU
*Wireless standard:IEEE802.11b/g/n,2.4GHz
*Housing Color:Whtie
*Operation Temperature:-20℃~+50℃
*Plastic material:ABS+PC
*Fire-protection rating:94-V0
Package Size:6262*86mm Weight:80g
Notice:
HLW8032 occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.
To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.
Product specifications
Mi Home app compatible:Probably NO
Brand name:TASMOTA
Camera equipped:No
Certification:CE
Communication method:Wi-Fi
Compatibility:All Compatible
Hign-concerned chemical:None
Model number:PG01V2
Origin:Mainland China
State of assembly:Ready-to-Go